Silicon Power Ace A55 2.5" 128 GB Serial ATA III SLC

SKU
SP128GBSS3A55S25
Login for pricing
In stock
Ace A55, 128GB, SATA III, Black
Affordable Upgrade for Everyone
A high-quality product for the budget-minded among us, the A55 is positioned as one of the most cost-effective SSD models. With its advanced SATA III 6Gb/s interface and an affordable price, you can now easily upgrade your old computer without spending a fortune.

Time is Money! Don't Waste It
Still wasting precious time while booting your computer or loading applications? Then it's time to get rid of your old hard drive and switch to an SSD. Powered by SATA III 6GB/s interface, the A55 is able to boot your computer or launch applications within seconds.

An Upgrade as Easy as 1-2-3
Upgrading your computer is a piece of cake – you don’t need to be a techie to do it. Just follow these three easy steps:
Step 1. Backup your data to another storage device
Step 2. Remove the old HDD from your computer
Step 3. Insert the A55 in your computer.

Bad Block Management for Higher Reliability
Even new disks can contain one or more bad blocks which may cause irreparable damage to your system. But have no fear! To prevent flash memory corruption, the A55 is built with bad block management technology. Bad blocks are continually monitored and replaced to keep your system in good condition and to improve reliability and endurance of the SSD. Because we do care about your data.

Durability and Performance
Equipped with an original controller and 3D NAND flash, the A55 can not only guarantee stability and durability. It also delivers outstanding performance which enables 10-second quick boot-ups, shorter application load times and faster data transmission speed. Whether you are web surfing, enjoying a good movie, or have to handle paperwork, the A55 will bring you a smooth, lag-free experience.

Light and S.M.A.R.T.
The A55 is one of the lightest and thinnest SSD of its kind yet it is shock- and vibration-proof since it contains no moving parts. Furthermore, S.M.A.R.T. monitoring system and ECC technology are built to promise higher data transmission safety.

SLC Cache Technology
The A55 applies ”SLC Cache technology” with a new caching architecture that combines both SLC and TLC flash blocks. This technology enables all data to be written in the SLC section before being sequentially copied to the TLC block, and as a consequence allows for higher peak writing performance. The A55 also uses “DRAM buffer cache” to improve overall performance and to reduce write amplification on the TLC portion. This leads to enhanced endurance and a longer lifespan of the SSD.

Internal Auto-Copy Technology
The A55’s auto-copy technology allows automatic copy operations from the SLC cache to the TLC blocks inside the NAND without using the controller or DDR. This supports higher efficiency by reducing the controller’s and DRAM’s workload.

Free-Download of SSD Health Monitor - SP Toolbox
Easily monitor your new SSD’s health with our free-download software – SP Toolbox. Run performance tests on the A55, get an overall function evaluation, or check detailed information about your device, including used space, device temperature, total bytes written, and many more.
SKU SP128GBSS3A55S25
EAN 0886576030425
Specification
Hard drive
SSD capacity128 GB
Memory typeSLC
Data transmission
Data transfer rate6 Gbit/s
Endurance
Mean time between failures (MTBF)1500000 h
Performance
InterfaceSerial ATA III
Component forLaptop
Sequential write speed (CDM)370 MB/s
Sequential read speed (CDM)460 MB/s
NAND flash typeSLC (Single Level Cell)
Sequential read speed (ATTO)550 MB/s
Sequential write speed (ATTO)420 MB/s
SSD capacity128 GB
S.M.A.R.T. supportYes
TRIM supportYes
RAID supportYes
ECCYes
Memory typeSLC
Native Command Queuing (NCQ)Yes
Mean time between failures (MTBF)1500000 h
Data transfer rate6 Gbit/s
Design
Component forLaptop
Protection featuresShock resistant, Vibration proof
Product colourBlack
SSD form factor2.5"
Features
InterfaceSerial ATA III
Component forLaptop
Sequential write speed (CDM)370 MB/s
Sequential read speed (CDM)460 MB/s
NAND flash typeSLC (Single Level Cell)
Sequential read speed (ATTO)550 MB/s
Sequential write speed (ATTO)420 MB/s
SSD capacity128 GB
S.M.A.R.T. supportYes
TRIM supportYes
RAID supportYes
Protection featuresShock resistant, Vibration proof
ECCYes
Memory typeSLC
Native Command Queuing (NCQ)Yes
Mean time between failures (MTBF)1500000 h
Data transfer rate6 Gbit/s
SSD form factor2.5"
Harmonized System (HS) code84717070
Technical details
InterfaceSerial ATA III
S.M.A.R.T. supportYes
TRIM supportYes
RAID supportYes
Protection featuresShock resistant, Vibration proof
ECCYes
Native Command Queuing (NCQ)Yes
Product colourBlack
SSD form factor2.5"
Weight & dimensions
Width100 mm
Height7 mm
Depth69.8 mm
Logistics data
Harmonized System (HS) code84717070
Other features
Product colourBlack
Manufacturer Silicon Power
In Stock Y