Motorola BRKT-70661-01R mounting kit

SKU
BRKT-70661-01R
Login for pricing
Standard Mount for AN400/AN480 Antennas
More Information
SKU BRKT-70661-01R
EAN 4054842366790
Manufacturer Zebra
Availability In Stock
Standard – Two plates with an articulating joint
It has a 2.75” x 5.88” mounting plate and one swivel joint and one swivel plate. This is good when you have plenty of room where the antenna will be installed. With this bracket you can tilt the antenna up/down and side to side. Due to the closeness of its installation to a surface you will be limited in the amount of room you can turn or tilt the antenna.
Technical details
CompatibilityMotorola AN400 Motorola AN480
Weight & dimensions
Width69.8 mm
Height149.3 mm

You may also be interested in

Compare Products
Product Motorola BRKT-70661-01R mounting kit Motorola BRKT-70661-01R mounting kit Login for pricing
Motorola P1010338 mounting kit Black Motorola P1010338 mounting kit Black Login for pricing
Zebra P1050667-034 mounting kit
Hot Product
Zebra P1050667-034 mounting kit Login for pricing
Ergotron 34" Wall Track
New
Ergotron 34" Wall Track Login for pricing
Chief CMS0608 Chief CMS0608 Login for pricing
Vertiv Liebert Slide kit for rack installation - 18/32"
Bestseller
Vertiv Liebert Slide kit for rack inst... Login for pricing
SKU
BRKT-70661-01R
P1010338
P1050667-034
31-018-182
CMS072
RMKIT18-32
Description
Standard – Two plates with an articulating joint
It has a 2.75” x 5.88” mounting plate and one swivel joint and one swivel plate. This is good when you have plenty of room where the antenna will be installed. With this bracket you can tilt the antenna up/down and side to side. Due to the closeness of its installation to a surface you will be limited in the amount of room you can turn or tilt the antenna.
Attaches to the QLn420 or P4T single slot cradle for flexible mounting orientation

COMMONLY BUNDLED ITEMS:
P1050667-026
Vehicle Charging Cradle
Add an extra layer of protection from abrasion in harsh environments with a hard case. Includes metal belt clip.
Wall Track is a low-cost, zero-footprint mounting system that attaches to most vertical surfaces. It accommodates an entire computer workstation.

Separately-ordered brackets are required to attach components to Wall Track (view + Accessories). The height of components can be adjusted by loosening set-screws on these brackets.

Benefits

- Acts as a common interface for Wall Mount Arms and CPU Holders; accommodates an entire computer system.
- Strengthens installation by distributing weight over a larger surface area.
- Sturdy, extruded aluminum construction.
- OSHPD pre-approved for California hospital requirements.
- Includes channel covers that conceal and route cables.
CMS Speed-Connect Adjustable Extension Columns lower projector to desired height. Provides up to 2' range of height adjustment in 1" increments, depending on model (6" to 12' lengths available). Includes set screw for add stability. Consists of 1 1/2" NPT column, threaded on both ends. Use in combination with any Chief 1 1/2" NPT ceiling plate or other accessory.
Designed to adjust length without requiring disassembly.
Aluminum construction for easier installation – also saves on shipping costs.
* NOTE: Bracket adds 6 lbs/2.7 kg and .94"/24 mm depth to installation. Be sure additional weight does not extend wall or ceiling mount weight capacity.
Telescoping rails that mount to the sides of the rack-mount UPS to facilitate installation into a rack-mount enclosure. This kit is for use with all GXT 2U, GXT 5kVA and associated battery cabinets.
Related products:
GXT4-10000RT230E
GXT4-1000RT230E
GXT4-1500RT230E
GXT4-2000RT230E
GXT4-3000RT230E
GXT4-5000RT230E
GXT4-6000RT230E
GXT4-700RT230E
GXT4-48VBATTE
GXT4-72VBATTE
GXT4-240VBATTE
Short Description
Standard Mount for AN400/AN480 Antennas
RAM Mount Arm, f / Zebra P4T / QLn420
Hard Case w / Metal Belt Clip, f / Zebra QLn420
34" Wall Track
Speed-Connect™ 6-8’ (182.8-243.8cm) Adjustable Extension Column
Liebert RMKIT18-32 Sliding Rails
Manufacturer
Zebra
Zebra
Zebra
Ergotron
Chief
Vertiv