We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Lindy 140m Cat.6 DVI-D, USB, Audio and RS-232 KVM Extender
SKU
39245
- Extends DVI-D, USB 2.0, Audio and RS-232 up to 140m using only one Cat.6 cable
- Supports DVI Single Link resolutions up to 1920x1200
- 4 USB 2.0 Type A ports to connect keyboard, mouse and mass storage devices
- Easy, user friendly installation - no software required
- 2 year warranty
The Lindy Cat.6 DVI-D Single Link, USB, Audio and RS-232 KVM Extender allows users to control a source device such as a PC from a single keyboard, mouse and display up to 140m using a Cat.6 RJ-45 cable. Supports single link resolutions up to 1920x1200 and HDMI signals including Full HD 1080p, 3D and HDCP 1.4. Ideal for KVM applications, the Extender consists of a transmitter and a receiver unit. The transmitter must be connected to a source such as a PC or KVM Switch, while the console with display, keyboard and mouse must be connected to the receiver. It's also possible to connect additional USB 2.0 devices such as storage and hard drives (webcams are not supported).
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver or even at the loop out DVI port on the transmitter, while analogue audio 3.5mm inputs and outputs allow users to connect speakers, microphones and a line-in interface.
RS-232 connections also allow for integration into pre-installed control systems.
This extender provides a simple plug and play installation, with no additional drivers required, great for both professional and first time users. In addition to point-to-point applications, it can be used also via a gigabit network, a rotary switch on both units can pair transmitters with receivers.
Please note: to reach distances longer that 140m, it is possible to add a gigabit network switch or the repeater 42709 inbetween transmitter and receiver (with 42709 the total length supported is up to 280m).
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver or even at the loop out DVI port on the transmitter, while analogue audio 3.5mm inputs and outputs allow users to connect speakers, microphones and a line-in interface.
RS-232 connections also allow for integration into pre-installed control systems.
This extender provides a simple plug and play installation, with no additional drivers required, great for both professional and first time users. In addition to point-to-point applications, it can be used also via a gigabit network, a rotary switch on both units can pair transmitters with receivers.
Please note: to reach distances longer that 140m, it is possible to add a gigabit network switch or the repeater 42709 inbetween transmitter and receiver (with 42709 the total length supported is up to 280m).
Features | |
---|---|
Type | Transmitter & receiver |
Connectivity technology | Wired |
Maximum transfer distance | 140 m |
Cable types supported | Cat6 |
Product colour | Black |
Material | Metal |
Certification | CE, UKCA, FCC, RoHS, REACH & California Proposition 65 |
USB 2.0 ports quantity | 4 |
Maximum refresh rate | 60 Hz |
Transmitter | |
Transmitter video port type | DVI-I |
RJ-45 ports quantity (transmitter) | 1 |
Receiver | |
Receiver local video port type | DVI-I |
RJ-45 ports quantity (receiver) | 1 |
Ports & interfaces | |
USB 2.0 ports quantity | 4 |
USB port type | USB Type-A/USB Type-B |
RJ-45 ports quantity | 2 |
PC Audio in | Yes |
Weight & dimensions | |
Transmitter width | 12.5 cm |
Transmitter depth | 14 cm |
Transmitter height | 3 cm |
Receiver width | 12.5 cm |
Receiver depth | 14 cm |
Receiver height | 3 cm |
Package width | 355 mm |
Package depth | 195 mm |
Package height | 60 mm |
Package weight | 1.52 kg |
Packaging data | |
---|---|
Package width | 355 mm |
Package depth | 195 mm |
Package height | 60 mm |
Package weight | 1.52 kg |
AC adapter included | Yes |
Cables included | Audio (3.5mm), RS-232, USB Type-A to USB Type-B |
Manual | Yes |
Packaging content | |
AC adapter included | Yes |
Cables included | Audio (3.5mm), RS-232, USB Type-A to USB Type-B |
Manual | Yes |
Screwdriver included | Yes |
Technical details | |
Harmonized System (HS) code | 84733080 |
Weight | 1.27 kg |
Power requirements | 5VDC 2.6A |
Maximum resolution | 1920 x 1200 pixels |
Operational conditions | |
Operating temperature (T-T) | -20 - 60 °C |
Storage temperature (T-T) | -20 - 85 °C |
Operating relative humidity (H-H) | 0 - 95% |
Logistics data | |
Harmonized System (HS) code | 84733080 |
You may also be interested in
Product |
![]() |
![]() New
ATEN CE770 KVM extender Transmitter &a...
Login for pricing
|
![]() Popular
StarTech.com Long Range USB VGA KVM Co...
Login for pricing
|
![]() Bestseller
ADDER XDIP KVM extender
Login for pricing
|
![]() Hot Product
Icron Ranger 2312 KVM extender Transmi...
Login for pricing
|
![]() Recommended
Lindy 100m Cat.6A HDMI 4K60, Audio, IR...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
39245
|
CE770
|
SV565UTPUL
|
XDIP
|
00-00408
|
38344
|
Description |
The Lindy Cat.6 DVI-D Single Link, USB, Audio and RS-232 KVM Extender allows users to control a source device such as a PC from a single keyboard, mouse and display up to 140m using a Cat.6 RJ-45 cable. Supports single link resolutions up to 1920x1200 and HDMI signals including Full HD 1080p, 3D and HDCP 1.4. Ideal for KVM applications, the Extender consists of a transmitter and a receiver unit. The transmitter must be connected to a source such as a PC or KVM Switch, while the console with display, keyboard and mouse must be connected to the receiver. It's also possible to connect additional USB 2.0 devices such as storage and hard drives (webcams are not supported).
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver or even at the loop out DVI port on the transmitter, while analogue audio 3.5mm inputs and outputs allow users to connect speakers, microphones and a line-in interface. RS-232 connections also allow for integration into pre-installed control systems. This extender provides a simple plug and play installation, with no additional drivers required, great for both professional and first time users. In addition to point-to-point applications, it can be used also via a gigabit network, a rotary switch on both units can pair transmitters with receivers. Please note: to reach distances longer that 140m, it is possible to add a gigabit network switch or the repeater 42709 inbetween transmitter and receiver (with 42709 the total length supported is up to 280m). |
The CE770 is a USB based KVM Extender with Deskew function. The automatic signal compensation and RS-232 serial functionality allow access to a computer system from a remote USB console.
The CE770 supports RGB delay tuner to manually synchronize the RGB signals. This allows users to deploy system equipment over large distances. The CE770's line synchronizing function corrects color phase and timing errors that occur over long distance transmissions. It also enables you to manually tune the R/G/B signal settings. |
The SV565UTPUL Long Range USB VGA KVM Console Extender over Cat5 UTP (1000 ft) lets you control a server, computer or multiple computers (connected through KVM Switch) over a standard Cat5 or Cat6 UTP network cable connection, at distances of up to 1000ft (300m) away.
You can use your existing USB keyboard, USB mouse, and monitor to access both the server room and your office computer, saving space and avoiding the need for a dedicated remote console by allowing you to switch between workstation view and KVM view at the remote location. Backed by a StarTech.com 3-year warranty and free lifetime technical support. The StarTech.com Advantage - Great for high definition resolutions, with support of UXGA (1600 x 1200) and WUXGA (1920 x 1200) - Remote to local switching means that the computer or console being extended can still be accessed locally without the need to unplug/replug any connections - Backed by a StarTech.com 3 year hardware warranty and lifetime technical support |
The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.
- Uses IP technology over standard CATx network cable - Point-to-point, switching, sharing or small matrix operation - Local USB and video feed through ports - PoE models are powered by PoE or optional external PSU - USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen - Analog audio with headphone supportFEATURES: Configurable Units The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analogue audio and USB2.0 over a standard CATx network cable. High Quality Video, Real Time Control XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN.CATx Cable for Connection Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.Open RESTful API An API is now available so each XDIP Receiver can be controlled from a 3rd Party controller. An example App and code is available to help developers.Feed Through and Local Computer Support Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.EDID Management The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.Plug and Play There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.CD-Quality Analogue Audio CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).One Solution, Many Uses XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM Matrix Extended size of matrix. Since firmware version 1.05 each Receiver can now connect to a maximum number of 16 transmitter units and each Transmitter unit can now be connected to 256 receiver units |
The USB 2.0 Ranger 2312 extends high-speed USB 2.0 connections up to 100m using CAT 5e/6/7 with the option to power at either the LEX (Local Extender) or REX (Remote Extender). It features full device and host support as well as Mass Storage Acceleration for improved USB 2.0 device bulk transfer speeds over previous generation extenders and
theExtremeUSB® suite of features. |
The Lindy 100m Cat.6A HDMI 4K60, Audio, IR and RS-232 HDBaseT KVM Extender is a complete end to end high performance, reliable solution for extending uncompressed HDMI signals over long distances via Cat.6 network cable.
The following distance and resolution combinations are possible when using high quality Cat.6A or above U/FTP solid core cable*:100m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. An HDMI loop-out port on the transmitter allows an additional local display to be connected to the source side of the installation. ARC support over HDMI allows for audio content to be returned from the display to a connected amplifier or soundbar, while local audio extraction allows for the connection of audio outputs for immersive multi-channel audio. Audio embedding or de-embedding at the transmitter side can easily be switched via the push button on the main unit while it supports audio de-embedding at the receiver side to connect an audio source. PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter unit. Ideal when power outlets are limited at the receiver end of the installation. USB 2.0 ports allow for mouse, keyboard, and other devices to be connected to both units to control a source device such as a PC or laptop from each side of the installation. Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. Combined with CEC control, which allows commands from one main remote, this extension system allows for complete and simple control for the user. Bi-directional RS-232 and Ethernet ports also allow for integration into larger control systems, or connection to network switches and hubs with LAN access. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue. HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.To reach the best performances, U/FTP solid coreCat.6A or Cat.7 cable is recommended for HDBaseT 3.0.*Cat 6A U/FTP is the recommended setting; the skewless nature and inter-pair shielding of FTP provides the better near-end crosstalk (NEXT, source end) and far-end crosstalk (FEXT, receiver end) parameters required to achieve the maximum performance and distance. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances. |
Short Description |
140m Cat.6 DVI-D, USB, Audio and RS-232 KVM Extender
|
USB VGA/Audio Cat 5 KVM Extender with Deskew (1280 x 1024@300m)
|
StarTech.com Long Range 1000 ft USB VGA KVM Over CAT5/5e CAT6 UTP Extender - KVM Console Over Ethernet for multiple servers/PC's IT Grade (SV565UTPUL)
|
Link XDIP HDMI Digital Video, USB/Audio Extender over IP via 1GbE Network
|
2-Port USB 2.0 100m CAT 5e/6/7, Up to 480Mbps, 1 x USB Type B, 2 x USB Type A, RJ45
|
100m Cat.6A HDMI 4K60, Audio, IR and RS-232 HDBaseT 3.0 KVM Extender
|
Manufacturer |
Lindy
|
ATEN
|
StarTech.com
|
ADDER
|
Icron
|
Lindy
|