Kramer Electronics 900N 2.0 channels Black

TC3-AMP

953.402UK

A-2060DD

953.173UK

By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module.

Front Panel Input
Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.

D-Class Amplifier
Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary

Power Four Speakers
Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

Preset Memory
By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.

Tactile Dial
A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.

Remote Control
A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.

Easy to Install and Uninstall
A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.

Cables Included
Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

Secure
Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.

Close at Hand
Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.

Integrated Techconnect Family
Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

Fully featured stereo amplifier with mixer section for 2 microphones and a stereo audio source. An inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card and also has a Bluetooth receiver and FM radio tuner. A rotary switch selects between 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. Speaker connections on the rear panel are via 4mm binding posts, which can drive up to 2 x 8 Ohm speakers per channel to deliver 2 x 200W. Designed to offer installers a flexible solution for P.A. and music playback in bars, restaurants and function rooms.

Digital Mixer Amplifiers
The A-2060DD-EB is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

Discover all benefits on our landing page
The A-2000D Series is a range of high performance mixer power amplifiers at an optimal price/performance ratio: with excellent sound, energy efficient and eco-friendly. The A-2000D Series is suited for broadcasting paging or background music in schools, offices, shops, houses of worship and factories. Crystal clear announcements and high sound quality - the A-2000D is equipped with balanced microphone inputs for better isolation from external noise and provided with priority function on input #1, muting all other inputs when active.

The mixer power amplifier designed on power saving digital technology, supplied by AC main power with main power switch and power on indicator at front site, and shall control and mix 3 balanced MIC (phone jack and mini XLR) and 2 unbalanced (RCA pin jack) AUX inputs. Speaker outputs shall be balanced (floating) high-impedance, and there shall be a low-impedance REC out. The amplifier shall meet the following performance criteria: Power output shall be 60 W at less than 1% THD (at 1 kHz, 1/3 rated power). Frequency response shall be 50 Hz to 20 kHz (+/-3 dB), with an S/N ratio of over 60 dB. Phantom power (DC +21 V) and muting (of other input signals by 0 – 30 dB attenuation) shall be available for MIC 1. Bass Tone Control shall be +/-10 dB at 100 Hz, and Treble Tone Control shall be +/-10 dB at 10 kHz. Power, signal and peak indicators shall be provided. The panel shall be ABS black resin, and the case black steel plate. Dimensions shall be 420 (W) x 100.6 (H) x 280.3 (D) mm, and weight 4.0kg.

The mixer power amplifier shall be TOA model A-2060DD.

100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.

2 x 25w @ 8 ohms, 80Hz~22kHz, 98dB, 2 x Stereo inputs, IR Remote control

A2 Stereo PA Amplifier 2 x 200W, Class D, 20Hz - 20kHz, 92dB, Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)

220 - 240V, 50 - 60Hz, 60W, 50 - 20000Hz, 100V, Class D, 60dB, 420 x 100.6 x 280.3mm, 4.6kg, ABS resin, Steel

UM Series Ultra Compact Mixer-Amplifier 100V, Class D, USB/FM/BT, 1 x mic (6.3mm), 1 x line (2 x RCA), 1 x aux (3.5mm), 100Hz - 18kHz

Vision

Adastra

TOA

Adastra