We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
HPE Aruba Networking R7J38A wireless access point 4800 Mbit/s White Power over Ethernet (PoE)
SKU
R7J38A
| Maximum data transfer rate | 4800 Mbit/s |
|---|---|
| 5 GHz | Yes |
| 2.4 GHz | Yes |
| 6 GHz | Yes |
| SKU | R7J38A |
| EAN | 0190017493022 |
| Manufacturer | HPE |
| Availability | In Stock |
| Product Family | Aruba Networking |
Flagship Wi-Fi 6E Performance
The HPE Aruba Networking 650 Series Campus Access Points, based on the 802.11ax standard, take advantage of the 6 GHz band through three 4x4 MIMO radios (2.4 GHz, 5 GHz, and 6 GHz), deliver up to 7.8 Gbps maximum tri-band aggregate data rate.
Provides high availability with two 5 GbE ports for hitless failover for both data and power, allowing these dual ports to provide business continuity for mission critical applications with flexibility to support speeds of 1, 2.5, or 5 Gbps (or 100 Mbps).
Enhanced wireless experience with HPE Aruba Networking ClientMatch technology removes sticky client issues by steering a client to the AP where it receives one of the best radio signals.
Patented UTB filtering enables enterprises to take advantage of the high end of 5 GHz with the lower end of 6 GHz without creating coverage gaps or islands.
Offers precision locationing with the support of FTM 802.11mc for precision distance ranging and built-in GPS receivers for high-accuracy indoor location measurements.
Boost Security
The HPE Aruba Networking 650 Series Campus Access Points offer enhanced security with Dynamic Segmentation to remove the time-consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic protected and separated.
Offers stronger encryption and authentication with WPA3, protected credentials/keys storage for guest access with Enhanced Open, and user and IoT access policy enforcement firewalls (PEF).
Simplifies policy enforcement by using the PEF to encapsulate all traffic from the AP to the gateway (or mobility controller) for end-to-end encryption and inspection.
For enhanced device assurance, our APs include an installed Trusted Platform Module (TPM) for protected storage of credentials and keys, and boot code.
AI-powered Cloud Management and Flexible Deployment
The HPE Aruba Networking 650 Series Campus Access Points can operate as standalone access points or with a gateway for greater scalability, security, and manageability.
HPE Aruba Networking Central is an AI-powered solution that simplifies IT operations, improves agility, and reduces costs by unifying management of campus, branch, remote, data center, and IoT networks from one dashboard.
Zero Touch Provisioning provides ease of implementation in branch offices and remote sites, without on-site technical expertise.
You can deploy models with internal antennas or connectorized models that support external antennas to meet a range of environments.
HPE Aruba Networking Wi-Fi 6E APs allow countries to take advantage of Wi-Fi 6E once it is approved in the country though automated notification and easy deployment of 6 GHz regulatory rules.
Energy Saving and IoT Ready
The HPE Aruba Networking 650 Series Campus Access Points can serve as flexible IoT platforms that bolster network security and provide coverage for a broad range of IoT devices without the need for network overlays. Integrated BLE and Zigbee support make it easier to deploy and manage IoT.
Advanced IoT Coexistence (AIC) feature uses built-in filtering to allow Wi-Fi and BLE/Zigbee radios to operate at greater capacity without the impact of interference.
HPE Aruba Networking Central Client Insights uses deep packet inspection to provide additional context and behavioral information that help verify devices are receiving proper policy enforcement and continuously monitor for rogue devices.
AI-powered dynamic power save mode enables the HPE Aruba Networking 650 Series Campus Access Points to automatically wake up at a schedule when connectivity demand arises, reducing power demands and lowering the energy footprint to align with the organization’s sustainability initiatives.
The target wake time (TWT) establishes a schedule for when clients need to communicate with an AP to help improve client power savings and reduce airtime contention.
Deliver the highest levels of performance with Wi-Fi 6E—greater capacity, wider channels, and less interference.
Meet Aruba’s flagship Wi-Fi 6E access point
With up to 1200 MHz of new channels, capacity is nearly tripled—so you can meet growing demands due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud.
Greater capacity with 6GHz
The 650 Series APs are indoor access points that are fully equipped to support the 6 GHz band for faster performance, wider channels, and minimal interference. Our flagship campus Wi-Fi 6E APs deliver 7.8 Gbps maximum aggregate data rates and 4x4 MU-MIMO.
Maximize channel utilization
Aruba’s patented ultra tri-band filtering allows organizations to take full advantage of 6GHz unlicensed spectrum by dynamically adjusting the available channels to eliminate signal interference and performance degradation.
Highly efficient and secure
Wi-Fi 6E extends the 802.11ax standard to the 6GHz band. All the efficiency and security enhancements including orthogonal frequency-division multiple access (OFDMA), Multi-User MIMO, Enhanced Open, and WPA3 are supported.
IoT ready
Integrated Bluetooth Low Energy (BLE) and Zigbee support make it easier to deploy and manage IoT, including asset tracking, security solutions, and sensors.
Wi-Fi 6E for your most demanding environments
Aruba 650 Series APs take advantage of the 6 GHz band for fast, secure connectivity plus configurable 5 Gbps dual Ethernet ports for high availability.
Highly resilient
Provide hitless failover for data and power with two configurable HPE ® Smart Rate ethernet ports that can support 1, 2.5, or 5 Gbps.
Secure connectivity
Supports WPA3 and Enhanced Open as part of the Wi-Fi 6E standard for stronger guest access and data encryption.
Automatic role-based access enforcement
Centrally configure and automatically enforce role-based policies across wired and wireless networks.
Dynamic traffic steering
Load balance traffic for better performance by automatically steering traffic from the 2.4 GHz band to the preferred 5 GHz or 6 GHz band.
Meet Aruba’s flagship Wi-Fi 6E access point
With up to 1200 MHz of new channels, capacity is nearly tripled—so you can meet growing demands due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud.
Greater capacity with 6GHz
The 650 Series APs are indoor access points that are fully equipped to support the 6 GHz band for faster performance, wider channels, and minimal interference. Our flagship campus Wi-Fi 6E APs deliver 7.8 Gbps maximum aggregate data rates and 4x4 MU-MIMO.
Maximize channel utilization
Aruba’s patented ultra tri-band filtering allows organizations to take full advantage of 6GHz unlicensed spectrum by dynamically adjusting the available channels to eliminate signal interference and performance degradation.
Highly efficient and secure
Wi-Fi 6E extends the 802.11ax standard to the 6GHz band. All the efficiency and security enhancements including orthogonal frequency-division multiple access (OFDMA), Multi-User MIMO, Enhanced Open, and WPA3 are supported.
IoT ready
Integrated Bluetooth Low Energy (BLE) and Zigbee support make it easier to deploy and manage IoT, including asset tracking, security solutions, and sensors.
Wi-Fi 6E for your most demanding environments
Aruba 650 Series APs take advantage of the 6 GHz band for fast, secure connectivity plus configurable 5 Gbps dual Ethernet ports for high availability.
Highly resilient
Provide hitless failover for data and power with two configurable HPE ® Smart Rate ethernet ports that can support 1, 2.5, or 5 Gbps.
Secure connectivity
Supports WPA3 and Enhanced Open as part of the Wi-Fi 6E standard for stronger guest access and data encryption.
Automatic role-based access enforcement
Centrally configure and automatically enforce role-based policies across wired and wireless networks.
Dynamic traffic steering
Load balance traffic for better performance by automatically steering traffic from the 2.4 GHz band to the preferred 5 GHz or 6 GHz band.
| Data transmission | |
|---|---|
| Ethernet LAN data rates | 10,100,1000,2500,5000 Mbit/s |
| Maximum data transfer rate | 4800 Mbit/s |
| Performance | |
| 2.4 GHz | Yes |
| 5 GHz | Yes |
| Wi-Fi Multimedia (WMM)/(WME) | Yes |
| Automatic channel selection | Yes |
| Auto MDI/MDI-X | Yes |
| Reset button | Yes |
| Bandwidth | 160 GHz |
| Spread spectrum method | DSSS |
| Frequency band | 2.4 - 7.125 GHz |
| VLAN support | Yes |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3bz |
| Ethernet LAN data rates | 10,100,1000,2500,5000 Mbit/s |
| Channels quantity | 3 channels |
| Channel bandwidth | 160 MHz |
| Maximum data transfer rate | 4800 Mbit/s |
| MIMO type | Multi User MIMO |
| MIMO | Yes |
| Wireless LAN features | |
| Frequency band | 2.4 - 7.125 GHz |
| Channels quantity | 3 channels |
| Network | |
| Spread spectrum method | DSSS |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3bz |
| Bandwidth | |
| Bandwidth | 160 GHz |
| Channel bandwidth | 160 MHz |
| Management features | |
| VLAN support | Yes |
| Features | |
| 6 GHz | Yes |
| 2.4 GHz | Yes |
| 5 GHz | Yes |
| Wi-Fi Multimedia (WMM)/(WME) | Yes |
| Automatic channel selection | Yes |
| Auto MDI/MDI-X | Yes |
| Bandwidth | 160 GHz |
| Spread spectrum method | DSSS |
| Frequency band | 2.4 - 7.125 GHz |
| VLAN support | Yes |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3bz |
| Ethernet LAN data rates | 10,100,1000,2500,5000 Mbit/s |
| Channels quantity | 3 channels |
| Channel bandwidth | 160 MHz |
| Maximum data transfer rate | 4800 Mbit/s |
| Bluetooth | Yes |
| Bluetooth version | 5.0 |
| Maximal-Ratio Combining (MRC) | Yes |
| Dynamic Frequency Selection (DFS) | Yes |
| Data unit aggregation | A-MPDU, A-MSDU |
| Cyclic Shift Diversity (CSD) | Yes |
| Cyclic Delay Diversity (CDD) | Yes |
| MIMO type | Multi User MIMO |
| MIMO | Yes |
| Maximum data transfer rate (2.4 GHz) | 574 Mbit/s |
| Maximum data transfer rate (5 GHz) | 2400 Mbit/s |
| Maximum data transfer rate (6 GHz) | 4800 Mbit/s |
| Bluetooth Low Energy (BLE) | Yes |
| Trusted Platform Module (TPM) | Yes |
| BeamForming | Yes |
| Security | |
| Security algorithms | WPA, WPA2, WPA3 |
| Access Control List (ACL) | Yes |
| Ports & interfaces | |
| USB connector type | USB Type-A |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| DC-in jack | Yes |
| Power | |
| Power consumption (max) | 22.7 W |
| Power consumption (typical) | 20.2 W |
| Power over Ethernet (PoE) | Yes |
| DC voltage range | 12 V |
| Design | |
|---|---|
| Placement | Ceiling |
| Product colour | White |
| Reset button | Yes |
| LED indicators | Status, System |
| Antenna | |
| Antenna type | Internal |
| Antenna gain level (max) | 4.8 dBi |
| Antenna direction type | Omni-directional |
| Technical details | |
| Reset button | Yes |
| Sustainability compliance | Yes |
| Compliance certificates | Federal Communications Commission (FCC) |
| Indication | |
| LED indicators | Status, System |
| Software | |
| Access Control List (ACL) | Yes |
| Maximal-Ratio Combining (MRC) | Yes |
| Dynamic Frequency Selection (DFS) | Yes |
| Data unit aggregation | A-MPDU, A-MSDU |
| Cyclic Shift Diversity (CSD) | Yes |
| Cyclic Delay Diversity (CDD) | Yes |
| Weight & dimensions | |
| Width | 260 mm |
| Depth | 260 mm |
| Weight | 1.8 kg |
| Height | 60 mm |
| Package width | 285 mm |
| Package depth | 285 mm |
| Package height | 95 mm |
| Package weight | 2.3 kg |
| Packaging data | |
| Package width | 285 mm |
| Package depth | 285 mm |
| Package height | 95 mm |
| Package weight | 2.3 kg |
| Operational conditions | |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -25 - 55 °C |
| Storage relative humidity (H-H) | 10 - 100% |
| Sustainability | |
| Sustainability compliance | Yes |
| Logistics data | |
| Quantity per pack | 1 pc(s) |
You may also be interested in
| Product |
New
HPE Aruba Networking R7J38A wireless a...
Login for pricing
|
Bestseller
Cisco Catalyst 9120AXI-E Wireless Acce...
Login for pricing
|
Hot Product
Cisco Catalyst 9120AXE-E Wireless Acce...
Login for pricing
|
Recommended
Cisco C9130AXI-E wireless access point...
Login for pricing
|
Popular
Cisco Catalyst 9120AXI-EWC-E Wireless...
Login for pricing
|
Cisco C9124AXE-ROW wireless access poi...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
R7J38A
|
C9120AXI-E
|
C9120AXE-E
|
C9130AXI-E
|
C9120AXI-EWC-E
|
C9124AXE-ROW
|
| Manufacturer |
HPE
|
Cisco
|
Cisco
|
Cisco
|
Cisco
|
Cisco
|
| 2.4 GHz |
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
| 5 GHz |
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|