We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Brodit 712348 holder Active holder Mobile phone/Smartphone Black
SKU
712348
Product colour | Black |
---|---|
Proper use | Car/Indoor |
Mobile device type | Mobile phone/smartphone |
SKU | 712348 |
EAN | 7320287123487 |
Manufacturer | Brodit |
Availability | In Stock |
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Design | |
---|---|
Device mount type | Screw mount |
Mobile device type | Mobile phone/Smartphone |
Compatibility | Zebra TC27, TC22, HC50, HC20 |
Type | Active holder |
Proper use | Car/Indoor |
Product colour | Black |
Material | Acetal, Acrylonitrile butadiene styrene (ABS) |
Country of origin | Sweden |
Ergonomics | |
Swivel angle | 360° |
Tilt angle range | 0 - 17° |
Built-in charger | Yes |
Technical details | |
---|---|
Mobile device type | Mobile phone/Smartphone |
Compatibility | Zebra TC27, TC22, HC50, HC20 |
Type | Active holder |
Proper use | Car/Indoor |
Product colour | Black |
Material | Acetal, Acrylonitrile butadiene styrene (ABS) |
Tilt angle range | 0 - 17° |
Country of origin | Sweden |
Built-in charger | Yes |
Swivel angle | 360° |
Power | |
DC voltage range | 10 - 24 V |
Built-in charger | Yes |
Weight & dimensions | |
Width | 91 mm |
Depth | 69 mm |
Height | 120 mm |
Weight | 235 g |
You may also be interested in
Product |
![]() Recommended
Brodit 712348 holder Active holder Mob...
Login for pricing
|
![]() |
![]() Bestseller
Motorola 21-52612-01R holder Passive h...
Login for pricing
|
![]() Popular
Getac GOHKX1 holder Tablet/UMPC Black
Login for pricing
|
![]() New
Compulocks Universal Tablet Cling Wall...
Login for pricing
|
![]() Hot Product
Compulocks HoverTab Security Tablet Lo...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
712348
|
AK17463-002
|
21-52612-01R
|
GOHKX1
|
UCLGVWMB
|
HOVERTAB
|
Description |
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.
Easy-switching system: The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds. The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform. |
RAM Mount Kit for Flexi Mount of RW420 Vehicle Cradle
|
This scanner holder is designed for mounting on forklifts and other mobile warehouse machinery.
Compatible products: - Symbol P470 General Purpose Bar Code Scanner; - LS3578-FZ Rugged Bar Code Scanner; - LS3408-FZ Rugged Bar Code Scanner; - Symbol P460 General Purpose Bar Code Scanner; - LS3578-ER Rugged Bar Code Scanner. |
Hand-strap & Kick Stand for Getac RX10.
|
The Cling 2.0 VESA Wall Mount is designed to work with all iPad models with just one device! This updated version is compatible with a variety of tablet models and sizes making it a near universal tablet security solution.
Securing your tablet is a re-designed bracket clamp and VESA wall mount base. The most notable update is to the 100mm x 100mm VESA wall mount now includes cable management and hidden screw holes. The Cling 2.0 bracket can still rotate between portrait and landscape mode and setup is quick and easy. |
The HoverTab Security Stand - Universal Display Lockable stand for any Tablet or Smartphone
The clean looking Hover Tablet stand is a one of a kind product that can provide you with a simple clean way to securely display your tablet. Borrowing the best design features from several of our top-selling iPad stands and Galaxy Tab locks we have created this innovative product. The HoverTab is a two part system, the first being an adhesive steel plate that connects to the back of the iPad, Galaxy Tab or smartphone. The second is the six inch high stand, sloped at a 60 degree angle for an optimal viewing angle and has 4 inch base for stabilized balance no matter the connected device. Once the connecting plate has set on the back of the device you slide it on the hanger at the top of the Hover Stand. The first measure of security is an integrated keyed cylinder lock that latches the device in to place. The second is securing the stand itself by either screwing it to the table surface or connecting it with a security cable lock. All told this humble product is one of the most advanced tablet lock and stand. |
Short Description |
Active holder with cig-plug
|
AK17463-002, RAM Mount Kit
|
Scanner Holder, black/grey
|
Hand-strap & Kick Stand for Getac RX10
|
Cling Universal Security Display Tablet Holder - Black
|
Hovertab Universal Tablet Display Stand - Silver
|
Manufacturer |
Brodit
|
Zebra
|
Zebra
|
Getac
|
Compulocks
|
Compulocks
|