We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Allied Telesis FS710/5E Unmanaged Fast Ethernet (10/100) Green, Grey
SKU
AT-FS710/5E-60
The Allied Telesis FS710 Series is the economical and eco-friendly solution for today’s networks, providing an extensive range of cost-effective options.
The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop and small to medium network environments.
High performance
Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed and duplex modes of attached devices, and automatically configure for the best possible performance.
Quality and reliability
Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and
industry-recognized quality.
The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop and small to medium network environments.
High performance
Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed and duplex modes of attached devices, and automatically configure for the best possible performance.
Quality and reliability
Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and
industry-recognized quality.
Performance | |
---|---|
Packet buffer memory | 0.096 MB |
Auto-negotiation | Yes |
Harmonized System (HS) code | 85176990 |
Technical details | |
Product colour | Green, Grey |
Rack mounting | No |
Management features | |
Switch type | Unmanaged |
Ports & interfaces | |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
Network | |
Networking standards | IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Full duplex | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Auto-negotiation | Yes |
Data transmission | |
Jumbo frames | 2048 |
Throughput | 0.74 Mpps |
Packet buffer memory | 0.096 MB |
MAC address table | 2000 entries |
Switching capacity | 1 Gbit/s |
Jumbo frames support | Yes |
Certificates | |
Safety | UL60950-1, CSAC22.2 №60950-1, EN60950-1(TUV), CE |
Certification | VCCI Class B FCC Class B EN55032 Class A CISPR 32 Class B RCM Class B |
Memory | |
---|---|
Packet buffer memory | 0.096 MB |
Design | |
Wall mountable | Yes |
Safety | UL60950-1, CSAC22.2 №60950-1, EN60950-1(TUV), CE |
Product colour | Green, Grey |
LED indicators | Activity, Link, Power |
Certification | VCCI Class B FCC Class B EN55032 Class A CISPR 32 Class B RCM Class B |
Rack mounting | No |
Indication | |
LED indicators | Activity, Link, Power |
Power | |
Power consumption (max) | 1.7 W |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -20 - 70 °C |
Storage relative humidity (H-H) | 5 - 95% |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 5 - 90% |
Weight & dimensions | |
Width | 131 mm |
Depth | 101 mm |
Height | 30 mm |
Weight | 380 g |
Logistics data | |
Harmonized System (HS) code | 85176990 |
You may also be interested in
Product |
![]() New
Allied Telesis FS710/5E Unmanaged Fast...
Login for pricing
|
![]() |
![]() Popular
TP-Link TL-SF1024D network switch Unma...
Login for pricing
|
![]() Recommended
TP-Link TL-SF1005P network switch Unma...
Login for pricing
|
![]() Bestseller
TP-Link TL-SG1005P network switch Unma...
Login for pricing
|
![]() Hot Product
TP-Link TL-SG1005LP network switch Unm...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
AT-FS710/5E-60
|
TL-SF1008P
|
TL-SF1024D
|
TL-SF1005P
|
TL-SG1005P
|
TL-SG1005LP
|
Description |
The Allied Telesis FS710 Series is the economical and eco-friendly solution for today’s networks, providing an extensive range of cost-effective options.
The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop and small to medium network environments. High performance Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed and duplex modes of attached devices, and automatically configure for the best possible performance. Quality and reliability Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality. |
What This Product Does
TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Power over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). -Overload Arrangement TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o‑ the power of the lowest-priority port. -Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 57W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4. Easy To Use TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network. |
What This Product Does
The 24-Port 10/100Mbps Switch TL-SF1024D provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save the power consumption and most of the packaging material can be recycled, making it an eco-friendly solution for your business network. What This Product Does The 24-Port 10/100Mbps Switch TL-SF1024D provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. TP-LINK Green Technology This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024D forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024D work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance. - Innovative energy-efficient technology saves power up to 75% - Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode - Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput - 4.8 Gbps Switching Capacity - Store and forward Switching scheme - Auto-MDI/MDIX eliminates the need for crossover cables - Supports MAC address auto-learning and auto-aging - Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. - Plug and Play design simplifies installation - Fanless design to make sure it works quietly |
TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Power over Ethernet 4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Overload Arrangement TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4. Easy To Use TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network. |
Professional High-Power 5-Port Gigabit Switch with 4 PoE+ Ports - plug and play
Dedicated 4-Port PoE+ Switch (65 W Budget) for Numerous Applications Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 65 W PoE power budget for the 4 x PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more. Plug and Play No Configuration Required Intelligent Power Management When total power consumption exceeds 65 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged. Advanced Functions for Higher Performance QoS For Fluent Online Experience Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free. IGMP Snooping Traffic Optimization for IPTV IGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV. Durable Metal Casing The interior components of TL-SG1005P are protected by high-quality metal casing to ensure a long product life. Having passed an array of stringent reliability tests, TL-SG1005P delivers switching performance you can depend on. Key Features 5 x 10/100/1000 Mbps RJ45 ports With four PoE+ ports, transfers data and power on one single cable Works with IEEE 802.3af/at compliant PDs 802.1p/DSCP QoS enable smooth latency-sensitive traffic Supports PoE Power up to 30 W for each PoE port Supports PoE Power up to 65 W for all PoE ports Requires no configuration and installation Specifications Interface 5 x 10/100/1000Mbps RJ45 Ports AUTO Negotiation AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) Fan Quantity Fanless External Power Supply External Power Adapter (Output: 53.5 VDC / 1.31 A) Packet Forwarding Rate 7.44 Mpps PoE Ports (RJ45) Standard: 802.3 af/at compliant PoE Ports: Ports 1–4 Power Supply: 65 W Mac Address Table 2K Jumbo Frame 16 KB Switching Capacity 10 Gbps Dimensions ( W x D x H ) 3.9 x 3.9 x1.0 in (99.8 x 98 x25 mm) Max Power Consumption 4.29 W (220/50 Hz. no PD connected) 74.24 W (220/50 Hz. with 65 W PD connected) Max Heat Dissipation 14.63 BTU/h (no PD connected) 253.16 BTU/h (with 65 W PD connected) SOFTWARE FEATURES Advanced Features Compatible With IEEE 802.3af/at Compliant PDs Mac Address Auto-Learning And Auto-Aging IEEE 802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Transfer Method Store-And-Forward Certification FCC, CE, RoHS Package Contents TL-SG1005P Power Adapter Installation Guide Environment Operating Temperature: 0–40 degrees (32–104 C) Storage Temperature: -40–70 degrees (-40–158 C) Operating Humidity: 10–90% RH non-condensing Storage Humidity: 5–90% RH non-condensing |
Professional 5-Port Gigabit Switch with 4 PoE+ Ports
Plug and Play, with PoE power supply which meets the needs of diverse devices. Dedicated 4-Port PoE+ Switch (40 W Budget) for Numerous Applications Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 40 W PoE power budget for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more. Intelligent Power Management When total power consumption exceeds 40 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged. Advanced Functions for Higher Performance Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free. IGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV. Durable Metal Casing The interior components of TL-SG1005LP are protected by high-quality metal casing to ensure a long product life. Having passed an array of stringent reliability tests, TL-SG1005LP delivers switching performance you can depend on. |
Short Description |
FS710/5E - 5-port 10/100TX, 1Gbps, 0.74Mpps, 1.7W
|
8-Port 10/100Mbps Desktop Switch with 4-Port PoE
|
24-Port 10/100Mbps, Desktop, Rackmount Switch, 4.8 Gbps, Black
|
5x 10/100Mbps RJ-45, PoE, 1 Gbps, 99.8x98x25 mm
|
5 10/100/1000Mbps RJ45 Ports
|
5x 1G RJ-45, 10 Gbps, 7.44 Mpps, PoE, 99.8×98×25 mm
|
Manufacturer |
Allied Telesis
|
TP-LINK
|
TP-LINK
|
TP-LINK
|
TP-LINK
|
TP-LINK
|