Tripp Lite B127A-1A1-BDBD DisplayPort over Cat6 Extender Kit, KVM Support, USB, 4K, DP1.2a, PoC, HDCP 2.2, 230 ft. (70 m), TAA

SKU
B127A-1A1-BDBD
Login for pricing
In stock
DisplayPort over Cat6 Extender Kit, KVM Support, USB, 4K, DP1.2a, PoC, HDCP 2.2, 230 ft. (70 m), TAA
DisplayPort Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft.
The B127A-1A1-BDBD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70 meters) away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 feet (122 meters) or 460 feet (140 meters), respectively.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDBD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable (such as P568- or P569-Series). This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/30 Hz to function properly.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.
DIP Switch Extends Your Choice of Either USB or IR
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as P580-Series). Then, connect the receiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BDBD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
SKU B127A-1A1-BDBD
EAN 0037332261311
Specification
Features
MaterialMetal
HDCPYes
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Consumer Electronics Control (CEC) supportYes
3DYes
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance70.1 m
Audio systemMultichannel
LED indicatorsYes
Product colourBlack
Extended display identification data (EDID)Yes
HDCP version2.2
Technical details
MaterialMetal
HDCPYes
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Consumer Electronics Control (CEC) supportYes
3DYes
Package typeBox
Ethernet LANYes
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance70.1 m
Audio systemMultichannel
Product colourBlack
Connectivity technologyWired
Country of originTaiwan
Master (outer) case GTIN (EAN/UPC)10037332261318
Sustainability complianceYes
Compliance certificatesCE, REACH, RoHS
Ports & interfaces
Remote (IR) output2
Remote (IR) input2
USB ports quantity3
DisplayPorts out1
DisplayPorts in1
USB version1.1
USB connector typeMicro-USB, USB Type-A
Ethernet LANYes
RJ-45 input ports1
RJ-45 output ports1
Number of HDMI outputs1
HDMI version2.0
DC-in jackYes
Connectivity technologyWired
Digital audio optical out1
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
External power adapterYes
Operating voltage24 V
Indication
LED indicatorsYes
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight453.6 g
Transmitter weight453.6 g
Transmitter dimensions (WxDxH)115 x 62.4 x 27 mm
Receiver dimensions (WxDxH)115 x 62.4 x 27 mm
Package depth164.1 mm
Package width260.1 mm
Package height55.1 mm
Package weight450 g
Packaging data
Package typeBox
Package depth164.1 mm
Package width260.1 mm
Package height55.1 mm
Package weight450 g
Logistics data
Master (outer) case width573 mm
Master (outer) case length273 mm
Master (outer) case height175 mm
Master (outer) case gross weight7.9 kg
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332261318
Manufacturer Tripp Lite
PDF Url https://objects.icecat.biz/object
In Stock Y