We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Lindy 100m Cat.6A 2 Host USB 3.2 Gen 1 HDBaseT Extender
SKU
43421
- Extend USB 3.2 Gen 1 signals from 2 hosts up to 100m using Cat.6A network cable (not included)
- Power over Cable requires a single power supply to be connected to the transmitter or receiver only
- Supports USB 3.2 Gen 1 (USB 3.0) up to 5Gbps, USB 2.0/1.1 backwards compatibility, RS232, APIs and FSYNC pass-through ports
- Plug & Play installation
This Lindy USB 3.2 Gen 1 HDBaseT Extender can be used to extend the distance between USB peripheral devices and 2 host computers by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable.
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 switchable host ports, one Type C and one Type B, with additional local device ports; 4 ports on the Receiver can provide 5V power as well to the connected devices: 2 Type A ports support up to 1.5A each, 1 Type A and 1 Type C ports support up to 1A each.
Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. It's also possible to control the extender via API commands.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable.
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 switchable host ports, one Type C and one Type B, with additional local device ports; 4 ports on the Receiver can provide 5V power as well to the connected devices: 2 Type A ports support up to 1.5A each, 1 Type A and 1 Type C ports support up to 1A each.
Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. It's also possible to control the extender via API commands.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
| Performance | |
|---|---|
| Chipset (transmitter) | VS6320 |
| Plug and Play | Yes |
| Type | Network transmitter & receiver |
| Maximum transfer distance | 100 m |
| Power over Ethernet (PoE) | Yes |
| Data transfer rate | 480 Mbit/s |
| Cable types supported | Cat6a |
| Ports & interfaces | |
| RJ-45 ports quantity (transmitter) | 1 |
| RJ-45 ports quantity (receiver) | 1 |
| DC-in jack | Yes |
| Ethernet LAN (RJ-45) ports | 2 |
| Contact material | Phosphor bronze |
| Connector material | Gold |
| Connector contacts plating | Gold |
| USB Type-C ports quantity (transmitter) | 3 |
| USB Type-C ports quantity (receiver) | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 5 |
| Design | |
| Housing material | Metal |
| LED indicators | Yes |
| Certification | CE, UKCA, FCC, RoHS & REACH, CP65 |
| Product colour | Black |
| Power | |
| Power over Ethernet (PoE) | Yes |
| External power adapter | Yes |
| Output voltage | 24 V |
| Output current | 3.75 A |
| Included power plug types | AU, EU, UK, US |
| Power note | 5.5/2.1mm DC |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage relative humidity (H-H) | 10 - 90% |
| Weight & dimensions | |
| Width | 140 mm |
| Depth | 75 mm |
| Height | 23 mm |
| Weight | 1.72 kg |
| Packaging content | |
|---|---|
| Manual | Yes |
| Cables included | USB Type-A to USB Type-B |
| Packaging data | |
| Package type | Box |
| Package volume | 2020 cm³ |
| Package width | 270 mm |
| Package depth | 245 mm |
| Package height | 75 mm |
| Technical details | |
| Chipset (transmitter) | VS6320 |
| Plug and Play | Yes |
| LED indicators | Yes |
| Type | Network transmitter & receiver |
| Maximum transfer distance | 100 m |
| Power over Ethernet (PoE) | Yes |
| Data transfer rate | 480 Mbit/s |
| Cable types supported | Cat6a |
| Harmonized System (HS) code | 85176990 |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Colour | |
| Product colour | Black |
| Certificates | |
| Certification | CE, UKCA, FCC, RoHS & REACH, CP65 |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
You may also be interested in
| Product |
Hot Product
Lindy 100m Cat.6A 2 Host USB 3.2 Gen 1...
Login for pricing
|
Bestseller
LevelOne Outdoor PoE Repeater, Cascada...
Login for pricing
|
Recommended
LevelOne PoE over 2-wire Receiver
Login for pricing
|
New
LevelOne Gigabit PoE Repeater, Cascada...
Login for pricing
|
Popular
LevelOne PoE Repeater, Cascadable, 2 P...
Login for pricing
|
LevelOne Gigabit PoE Repeater, Cascada...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
43421
|
POR-1100
|
POT-0110
|
POR-0120
|
POR-0202
|
POR-0222
|
| Description |
This Lindy USB 3.2 Gen 1 HDBaseT Extender can be used to extend the distance between USB peripheral devices and 2 host computers by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable. The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 switchable host ports, one Type C and one Type B, with additional local device ports; 4 ports on the Receiver can provide 5V power as well to the connected devices: 2 Type A ports support up to 1.5A each, 1 Type A and 1 Type C ports support up to 1A each. Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. It's also possible to control the extender via API commands. With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue. *: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables. This extender is certified by HDBaseT Alliance. HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable. HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances. |
The LevelOne POR-1100 is the perfect accessory to increase your Power over Ethernet network performance. Normal ethernet cable runs only reach 100 meters, but with POR-1100 installers can extend the PoE network performance up to 200 meters! Simple yet durable, no software required. As a PoE Repeater, POR-1100 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1100 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices. The POR-1100 is the perfect solution for taking Ethernet to areas such as roof tops, factory floors, airports manufacturing plants, and large warehouses.
|
The POT system, one master & one slave units, provide a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line. Connection with a Class 0 PD device, the distance of two-wire 24AWG cables can be up to 400 meters when using a 48Watt high power PoE Switch, FSW-0513/0543. Users may select a fixed data rate for different copper line ranging. The maximum data rate can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE Ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. The remote unit regenerates the power and provides the PoE capability to power up the remote PD device up to 15 watts when connecting to 48Watt High Power Switch, FSW-0513. The POT M/S supports the indoor & outdoor models with wall-mount feature. Equipped with dip switches, the 2-wire line speed can be configured to meet different line gauges and distances. A POT pair offers a cost effective solution for remote power applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted line. - Two-wire cables are used to connect 100Mbps Fast Ethernet PoE devices - Maximum distance up to 400 meters for 24 AWG cable - Maximum data rate up to 60 Mbps full duplex - Remote PoE capability for PD devices of WiFi AP, IP camera, IP telephones - Up to 15 Watts for remote PoE, Depending on PSE power - Easy installation by indoor & outdoor different models - Dip Switches for 2-wire line rate settings - Auto MDIX for 10/100 Base T Ethernet LAN Ports - Low-Latency for Video/Voice/Data applications |
For system integrators looking for a professional solution to help extend their PoE network, POR-0120 is the perfect accessory to increase your Power over Ethernet network performance. LevelOne POR-0120, a 1-Port Gigabit PoE Repeater requiring neither configuration nor electrical power, is an innovative transmitter to pass on both data and power extend to another 100 meters. The delivery though one PoE port and one non-PoE port are adequate to extend network devices such as WLAN Access Points, Network Cameras and other appliances with high-speed to the network for greater deployment flexibility.
PoE Compliance Our device features PoE (Power-over-Ethernet) capability, which carries electrical power along with data in a safe way using Ethernet cabling. Thus providing great cost savings by eliminating the need for additional power cables and outlets. In addition, it enhances flexibility, for instance, you can set up a PoE wireless access point in close proximity where the reception is better. Easy Deployment No software installation is required. Simply just plug and play as no external power supply is needed, due to all electrical power comes from the PSE (Power Sending Equipment), for instance, it could be a PoE Gigabit Ethernet Switch. Therefore the power source is centrally managed from one location easily and efficiently. Scalable Design LevelOne network devices are the perfect solution to help you extend your existing PoE network. Normal Ethernet cable, for example the cat5e standard, runs up to 100 meters, but with the installation of a single PoE repeater can increase the distance up to 200 meters. Furthermore, you can triple your range or even more by daisy-chaining multiple PoE repeaters. |
Extend the reach of your PoE-Plus devices
For system integrators looking for a professional solution to help extend their PoE (802.3af/at) network, POR-0202 is the perfect accessory to increase your network performance. As a 2-port repeater, it’s now easier to add more devices to the network for greater deployment flexibility. Normal cable runs only reach 100 meters, but with POR-0202 installers can extend the PoE network performance up to 200 meters. Furthermore, you can triple your range or even more by daisy-chaining* multiple PoE repeaters. * Maximum distance depends on the required Wattage of the PD. Simple yet durable, no software required As a PoE-Plus Repeater, POR-0202 receives all power from the Power Sending Equipment (PSE), such as a PoE-Plus switch. This means that POR-0202 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices on a network. POR-0202 has 3 RJ-45 ports for easy deployment, 1 “IN” port that accepts the power and data for the first 100 meters, and 2 “OUT” ports that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0202 fits into any tight deployments. Applications POR-0202 is a long-ranged solution for deploying PoE IP Cameras and any Fast Ethernet PoE PD powered by 802.3at PSE. - High Power Midspan PoE compliant to simplify deployment and installation - Built-in 2 PoE output ports for PoE devices - Forwards Power over Ethernet to remote device - Extends PoE connection for another 100 meters - Multiple PoE repeaters can be deployed by daisy chain to extend range - Simple Plug and Play installation, no additional power supply required |
Extend the reach of your Gigabit PoE-Plus devices
For system integrators looking for a professional solution to help extend their Gigabit PoE (802.3af/at) network, POR-0222 is the perfect accessory to increase your network performance. As a 2-port repeater, it’s now easier to add more devices to the network for greater deployment flexibility. Normal cable runs only reach 100 meters, but with POR-0222 installers can extend the PoE network performance up to 200 meters. Furthermore, you can triple your range or even more by daisy-chaining* multiple PoE repeaters. * Maximum distance depends on the required Wattage of the PD. Simple yet durable, no software required As a Gigabit PoE-Plus Repeater, POR-0222 receives all power from the Power Sending Equipment (PSE), such as a Gigabit PoE-Plus switch. This means that POR-0222 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices on a network. POR-0222 has 3 RJ-45 ports for easy deployment, 1 “IN” port that accepts the power and data for the first 100 meters, and 2 “OUT” ports that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0222 fits into any tight deployments. Applications POR-0222 is a long-ranged solution for deploying PoE IP Digital Signage and any Gigabit PoE PD powered by 802.3at Gigabit PSE. - High Power Midspan PoE compliant to simplify deployment and installation - Built-in 2 PoE output ports for PoE devices - 10/100/1000Mbps wire speed transmission and reception - Forwards Power over Ethernet to remote device - Extends Gigabit PoE connection for another 100 meters - Multiple PoE repeaters can be deployed by daisy chain to extend range - Simple Plug and Play installation, no additional power supply required |
| Short Description |
100m Cat.6A 2 Host USB 3.2 Gen 1 HDBaseT Extender
|
Outdoor PoE Repeater, Cascadable,
|
PoE Extender, Receiver, Over 2-wire, 48V, 60/60 Mbps
|
2 x 10/100/1000Base-T RJ-45, 100m, 2.5W, IEEE 802.3x/af
|
2-Port PoE+ Repeater, 2.5W, 44-57V PoE, IEEE 802.3/u/x/af/at
|
2-Port Gigabit PoE+ Repeater, 2.5W, 44-57V PoE, IEEE 802.3/u/ab/x/af/at
|
| Manufacturer |
Lindy
|
LevelOne
|
LevelOne
|
LevelOne
|
LevelOne
|
LevelOne
|